charging-cabinet/.tmp-scope-check/ddl_before.json

{
 "charge_orders": "CREATE TABLE `charge_orders` (\n  `id` bigint NOT NULL AUTO_INCREMENT,\n  `compartment_id` bigint NOT NULL COMMENT '仓体ID',\n  `cabinet_id` bigint NOT NULL COMMENT '柜子ID',\n  `battery_id` varchar(50) NOT NULL COMMENT '电池ID',\n  `start_time` timestamp NULL DEFAULT NULL COMMENT '充电开始时间',\n  `end_time` timestamp NULL DEFAULT NULL COMMENT '充电结束时间',\n  `start_soc` int DEFAULT NULL COMMENT '起始电量(‰)',\n  `end_soc` int DEFAULT NULL COMMENT '结束电量(‰)',\n  `energy` int DEFAULT '0' COMMENT '充电量(Wh)',\n  `reason` varchar(20) DEFAULT NULL COMMENT '结束原因: normal/user_stop/forced/timeout',\n  `status` tinyint DEFAULT '0' COMMENT '0充电中 1已完成 2异常',\n  `created_at` timestamp NOT NULL DEFAULT CURRENT_TIMESTAMP,\n  `active_flag` bigint GENERATED ALWAYS AS ((case when (`status` = 0) then `compartment_id` else NULL end)) STORED COMMENT '活跃订单唯一性哨兵：status=0 时=compartment_id，否则 NULL（NULL 不参与唯一性）',\n  PRIMARY KEY (`id`),\n  UNIQUE KEY `uk_charge_orders_active` (`active_flag`),\n  KEY `cabinet_id` (`cabinet_id`),\n  KEY `idx_battery` (`battery_id`),\n  KEY `idx_compartment` (`compartment_id`),\n  KEY `idx_charge_orders_status_start` (`status`,`start_time`),\n  CONSTRAINT `charge_orders_ibfk_1` FOREIGN KEY (`compartment_id`) REFERENCES `compartments` (`id`),\n  CONSTRAINT `charge_orders_ibfk_2` FOREIGN KEY (`cabinet_id`) REFERENCES `cabinets` (`id`)\n) ENGINE=InnoDB AUTO_INCREMENT=25 DEFAULT CHARSET=utf8mb4 COLLATE=utf8mb4_0900_ai_ci",
 "charge_records": "CREATE TABLE `charge_records` (\n  `id` bigint NOT NULL AUTO_INCREMENT,\n  `compartment_id` bigint NOT NULL,\n  `cabinet_id` bigint NOT NULL,\n  `start_time` datetime NOT NULL DEFAULT CURRENT_TIMESTAMP,\n  `end_time` datetime NOT NULL DEFAULT CURRENT_TIMESTAMP,\n  `energy` bigint NOT NULL DEFAULT '0' COMMENT '充电量(Wh)',\n  `max_temperature` bigint NOT NULL DEFAULT '0' COMMENT '最高温度(K×100)',\n  `status` tinyint DEFAULT '0' COMMENT '0正常 1异常 2手动停止',\n  `created_at` timestamp NOT NULL DEFAULT CURRENT_TIMESTAMP,\n  PRIMARY KEY (`id`),\n  KEY `compartment_id` (`compartment_id`),\n  KEY `idx_charge_records_cabinet` (`cabinet_id`),\n  KEY `idx_charge_records_cabinet_start_time` (`cabinet_id`,`start_time`),\n  KEY `idx_charge_records_start_time` (`start_time`),\n  CONSTRAINT `charge_records_ibfk_1` FOREIGN KEY (`compartment_id`) REFERENCES `compartments` (`id`),\n  CONSTRAINT `charge_records_ibfk_2` FOREIGN KEY (`cabinet_id`) REFERENCES `cabinets` (`id`)\n) ENGINE=InnoDB AUTO_INCREMENT=32 DEFAULT CHARSET=utf8mb4 COLLATE=utf8mb4_0900_ai_ci",
 "device_logs": "CREATE TABLE `device_logs` (\n  `id` bigint NOT NULL AUTO_INCREMENT,\n  `cabinet_id` bigint NOT NULL,\n  `log_type` tinyint NOT NULL COMMENT '1状态上报 2故障 3告警 4停电',\n  `content` text COMMENT '日志内容JSON',\n  `created_at` timestamp NOT NULL DEFAULT CURRENT_TIMESTAMP,\n  PRIMARY KEY (`id`),\n  KEY `idx_device_logs_cabinet` (`cabinet_id`),\n  KEY `idx_device_logs_created` (`created_at`),\n  CONSTRAINT `device_logs_ibfk_1` FOREIGN KEY (`cabinet_id`) REFERENCES `cabinets` (`id`)\n) ENGINE=InnoDB AUTO_INCREMENT=101 DEFAULT CHARSET=utf8mb4 COLLATE=utf8mb4_0900_ai_ci"
}
-												feat(scope)+fix(db)+feat(security): 数据范围(项目级)生效、库列类型对齐、安全加固、状态位分层展示、能耗实时聚合

- user_scopes 由"假开关"做成生效：粒度到项目级（组织隔离 ∧ 项目∈范围，取交集）；未配置=不限制（逐字向后兼容）；
  总管理员豁免；脏数据保守忽略不锁死；配置期校验存在性+归属；逐接口叠加（列表/详情/写操作/Excel 导出落 scope_project_ids）；
  前端新增"数据范围"弹窗入口。顺带修 GET /api/charge-orders 此前完全没有组织隔离（跨租户泄露）、
  GET /api/projects/{id}/cabinets 的 500
- 数据库列类型系统性对齐：扫描并修复 pms_dev 32 项 / pms 18 项漂移（时间列统一 DATETIME，sqlx NaiveDateTime 只兼容 DATETIME）；
  DECIMAL→BIGINT 与列注释口径拉平；修复生产 GET /api/charge-orders、GET /api/device-logs 必然 500 的根因；
  恢复 7 张表丢失的 updated_at ON UPDATE（行为变化，已记入 AGENTS.md）；修正 SCHEMA_SQL 前向引用（空库建表必崩）；
  新增 tools/db_schema_diff.py（漂移检查，退出码可接部署前置）与 test/schema_alignment_e2e.py
- 安全加固四项：上传去 .svg + 魔数嗅探（堵存储型 XSS）；登录失败锁定(5次/15分)+challenge 限流+并发闸门+验证码容差收紧；
  服务降权 root→pms；nginx 安全头 + limit_req + CORS 白名单收敛
- TCP 连接登录门控（上行+下行同一规则）：login 前只放行 auth_str/login（PRE_LOGIN_ALLOWED_ACTS）
- 状态位按归属层级展示：柜级 status1/status2 显示在柜子（含柜门 + 开门按钮，独立动作不联动业务）、
  仓体级 batt_status/pow_status 显示在仓体；两端解析函数同源同名
- 能耗报表改实时聚合 charge_records（原 energy_stats 全表只读不写导致报表恒 0）+ 补复合索引
- 组织可见性：新增 GET /api/my-organizations（工厂全量、客户仅本组织）
- 仓体 status 仅表占用，充满/故障由 Redis 通道状态派生
- 订单/占用/队列运维缺口：h5 建单漏单、214 仓体自愈、device:reports 上限、死信 TTL、LimitNOFILE、
  每日 mysqldump + 回滚点保留 5 次
- 文档：AGENTS.md 补层级可见性/数据范围/状态位约定/数据库工具/行为变化；docs/API.md 删除废弃 TCP 章节、接口总表对齐 mod.rs

											
										
										
											2026-09-20 02:44:51 +08:00
+								{
 								 "charge_orders": "CREATE TABLE `charge_orders` (\n  `id` bigint NOT NULL AUTO_INCREMENT,\n  `compartment_id` bigint NOT NULL COMMENT '仓体ID',\n  `cabinet_id` bigint NOT NULL COMMENT '柜子ID',\n  `battery_id` varchar(50) NOT NULL COMMENT '电池ID',\n  `start_time` timestamp NULL DEFAULT NULL COMMENT '充电开始时间',\n  `end_time` timestamp NULL DEFAULT NULL COMMENT '充电结束时间',\n  `start_soc` int DEFAULT NULL COMMENT '起始电量(‰)',\n  `end_soc` int DEFAULT NULL COMMENT '结束电量(‰)',\n  `energy` int DEFAULT '0' COMMENT '充电量(Wh)',\n  `reason` varchar(20) DEFAULT NULL COMMENT '结束原因: normal/user_stop/forced/timeout',\n  `status` tinyint DEFAULT '0' COMMENT '0充电中 1已完成 2异常',\n  `created_at` timestamp NOT NULL DEFAULT CURRENT_TIMESTAMP,\n  `active_flag` bigint GENERATED ALWAYS AS ((case when (`status` = 0) then `compartment_id` else NULL end)) STORED COMMENT '活跃订单唯一性哨兵：status=0 时=compartment_id，否则 NULL（NULL 不参与唯一性）',\n  PRIMARY KEY (`id`),\n  UNIQUE KEY `uk_charge_orders_active` (`active_flag`),\n  KEY `cabinet_id` (`cabinet_id`),\n  KEY `idx_battery` (`battery_id`),\n  KEY `idx_compartment` (`compartment_id`),\n  KEY `idx_charge_orders_status_start` (`status`,`start_time`),\n  CONSTRAINT `charge_orders_ibfk_1` FOREIGN KEY (`compartment_id`) REFERENCES `compartments` (`id`),\n  CONSTRAINT `charge_orders_ibfk_2` FOREIGN KEY (`cabinet_id`) REFERENCES `cabinets` (`id`)\n) ENGINE=InnoDB AUTO_INCREMENT=25 DEFAULT CHARSET=utf8mb4 COLLATE=utf8mb4_0900_ai_ci",
 								 "charge_records": "CREATE TABLE `charge_records` (\n  `id` bigint NOT NULL AUTO_INCREMENT,\n  `compartment_id` bigint NOT NULL,\n  `cabinet_id` bigint NOT NULL,\n  `start_time` datetime NOT NULL DEFAULT CURRENT_TIMESTAMP,\n  `end_time` datetime NOT NULL DEFAULT CURRENT_TIMESTAMP,\n  `energy` bigint NOT NULL DEFAULT '0' COMMENT '充电量(Wh)',\n  `max_temperature` bigint NOT NULL DEFAULT '0' COMMENT '最高温度(K×100)',\n  `status` tinyint DEFAULT '0' COMMENT '0正常 1异常 2手动停止',\n  `created_at` timestamp NOT NULL DEFAULT CURRENT_TIMESTAMP,\n  PRIMARY KEY (`id`),\n  KEY `compartment_id` (`compartment_id`),\n  KEY `idx_charge_records_cabinet` (`cabinet_id`),\n  KEY `idx_charge_records_cabinet_start_time` (`cabinet_id`,`start_time`),\n  KEY `idx_charge_records_start_time` (`start_time`),\n  CONSTRAINT `charge_records_ibfk_1` FOREIGN KEY (`compartment_id`) REFERENCES `compartments` (`id`),\n  CONSTRAINT `charge_records_ibfk_2` FOREIGN KEY (`cabinet_id`) REFERENCES `cabinets` (`id`)\n) ENGINE=InnoDB AUTO_INCREMENT=32 DEFAULT CHARSET=utf8mb4 COLLATE=utf8mb4_0900_ai_ci",
 								 "device_logs": "CREATE TABLE `device_logs` (\n  `id` bigint NOT NULL AUTO_INCREMENT,\n  `cabinet_id` bigint NOT NULL,\n  `log_type` tinyint NOT NULL COMMENT '1状态上报 2故障 3告警 4停电',\n  `content` text COMMENT '日志内容JSON',\n  `created_at` timestamp NOT NULL DEFAULT CURRENT_TIMESTAMP,\n  PRIMARY KEY (`id`),\n  KEY `idx_device_logs_cabinet` (`cabinet_id`),\n  KEY `idx_device_logs_created` (`created_at`),\n  CONSTRAINT `device_logs_ibfk_1` FOREIGN KEY (`cabinet_id`) REFERENCES `cabinets` (`id`)\n) ENGINE=InnoDB AUTO_INCREMENT=101 DEFAULT CHARSET=utf8mb4 COLLATE=utf8mb4_0900_ai_ci"
 								}